Sliding system
Middle frame bending machine
A middle frame bending machine is designed to bend intersection profile. It can operate in artificial climate rooms, for example, in heated or cooled and ventilated manufacturing facilities or in well-ventilated underground facilities.
Technical characteristics
- Total dimensions: maximum 230*230*225 mm (when assembled).
- Weight: maximum 5 kg.
- Surfacing: body – chemical oxidation, working members – zinc, rollers – fluorine plastic.
- Minimal radius of the profile bending: 300 mm.
Hardware units and components
Hardware units and components:
- A stand
- A slider
- A handle
- A driving wheel
- A supporting wheel
- A driver
- A screw
A delivery set includes:
- A profile bending machine – 1
- A manual – 1
- Packing – 1
Prestarting procedures and operation
- Using the driver 6 unscrew the screw 7 all the way out together with the slider and driving wheel.
- Put the middle frame profile between the wheels 5 and the driving wheel 4 in accordance with the wheel profile. Move it to make sure that the bending area is where the wheels are. The profile should rest on both wheels.
- Using the driver 6 screw the screw 7 all the way in until the profile touches the wheels 4 and 5 (initial position).
- Turning the driver 6 press the profile.
- Using the lever 3 roll the section of the profile to be bent.
- Repeat the steps 4 and 5 to achieve the necessary bending radius.
- Unscrew the screw 7 and release the profile.
- Take the profile out of the bending machine.
- You have to take into consideration that the 70 mm end of the profile cannot be bent (process waste).
- Do not let the driving wheel 4 turn without the profile (to prevent idle turning push the profile manually).
- Bending can cause decorative film exfoliation and paint cover damage on the non-front surface.
- We recommend using patterns or counting the turns of the changeover handle to be able to repeat the bending radius. The manufacturer can implement constructive changes.
Safety requirements
The bending machine can be operated only by the employees who are aware of the operation manual and safety requirements.
While working with the machine the employees have to prevent any potential injuries by moving ends of the profile. No auxiliary leverages or impulse loads can be applied. A static load on the leverage 3 cannot exceed 10 kg.
Maintenance of the profile bending machine
The bending machine should be regularly (as necessary) cleaned from the accumulated dirt. A soft brush (no abrasives) can be used.
All friction surfaces have to be lubricated if necessary with ЦИАТИМ-201, GOST 6267-74.
Worn out rollers have to be replaced with new ones.
Warranty
The manufacturer guarantees faultless performance of a bending machine for 12 months as from the date of sale on condition of compliance with the operation rules.
